New 2025 Latest Questions 156-215.81 Dumps – Use Updated CheckPoint Exam [Q239-Q263]

4.2/5 - (6 votes)

New 2025 Latest Questions 156-215.81 Dumps – Use Updated CheckPoint Exam

Latest 156-215.81 Exam Dumps CheckPoint Exam from Training Expert ExamCost

NEW QUESTION 239
Application Control/URL filtering database library is known as:

Application database

AppWiki

Application-Forensic Database

Application Library

NEW QUESTION 240
Match the following commands to their correct function. Each command has one function only listed.

C1>F6; C2>F4; C3>F2; C4>F5

C1>F2; C2>F1; C3>F6; C4>F4

C1>F2; C2>F4; C3>F1; C4>F5

C1>F4; C2>F6; C3>F3; C4>F5

NEW QUESTION 241
What is the main difference between Static NAT and Hide NAT?

Static NAT only allows incoming connections to protect your network.

Static NAT allow incoming and outgoing connections. Hide NAT only allows outgoing connections.

Static NAT only allows outgoing connections. Hide NAT allows incoming and outgoing connections.

Hide NAT only allows incoming connections to protect your network.

NEW QUESTION 242
Which of the following is NOT a type of Endpoint Identity Agent?

Custom

Terminal

Full

Light

NEW QUESTION 243
What type of NAT is a one-to-one relationship where each host is translated to a unique address?

Source

Static

Hide

Destination

NEW QUESTION 244
Examine the sample Rule Base.

What will be the result of a verification of the policy from SmartConsole?

No errors or Warnings

Verification Error. Empty Source-List in Rule 5 (Mail Inbound)

Verification Error. Rule 4 (Web Inbound) hides Rule 6 (Webmaster access)

Verification Error. Rule 7 (Clean-Up Rule) hides Implicit Clean-up Rule

NEW QUESTION 245
When configuring Anti-Spoofing, which tracking options can an Administrator select?

Log, Alert, None

Log, Allow Packets, Email

Drop Packet, Alert, None

Log, Send SNMP Trap, Email

NEW QUESTION 246
What data MUST be supplied to the SmartConsole System Restore window to restore a backup?

Server, Username, Password, Path, Version

Username, Password, Path, Version

Server, Protocol, Username, Password, Destination Path

Server, Protocol, Username, Password, Path

NEW QUESTION 247
What must a Security Administrator do to comply with a management requirement to log all traffic accepted through the perimeter Security Gateway?

In Global Properties > Reporting Tools check the box Enable tracking all rules (including rules marked as None in the Track column). Send these logs to a secondary log server for a complete logging history. Use your normal log server for standard logging for troubleshooting.

Install the View Implicit Rules package using SmartUpdate.

Define two log servers on the R77 Gateway object. Lof Implied Rules on the first log server. Enable Log Rule Base on the second log server. Use SmartReporter to merge the two log server records into the same database for HIPPA log audits.

Check the Log Implied Rules Globally box on the R77 Gateway object.

NEW QUESTION 248
When a gateway requires user information for authentication, what order does it query servers for user information?

First – Internal user database, then LDAP servers in order of priority, finally the generic external user profile

First the Internal user database, then generic external user profile, finally LDAP servers in order of priority.

First the highest priority LDAP server, then the internal user database, then lower priority LDAP servers, finally the generic external profile

The external generic profile, then the internal user database finally the LDAP servers in order of priority.

NEW QUESTION 249
Which SmartConsole tab is used to monitor network and security performance?

Manage & Settings

Security Policies

Gateway & Servers

Logs & Monitor

NEW QUESTION 250
Which of the following methods can be used to update the trusted log server regarding the policy and configuration changes performed on the Security Management Server?

Save Policy

Install Database

Save session

Install Policy

NEW QUESTION 251
Fill in the blank Once a license is activated, a___________should be installed.

Security Gateway Contract file

Service Contract file

License Management file

License Contract file

NEW QUESTION 252
When defining group-based access in an LDAP environment with Identity Awareness, what is the BEST object type to represent an LDAP group in a Security Policy?

Access Role

User Group

SmartDirectory Group

Group Template

NEW QUESTION 253
The IT Management team is interested in the new features of the Check Point R81 Management and wants to upgrade but they are concerned that the existing R77.30 Gaia Gateways cannot be managed by R81 because it is so different.
As the administrator responsible for the Firewalls, how can you answer or confirm these concerns?

R81 Management contains compatibility packages for managing earlier versions of Check Point Gateways prior to R81. Consult the R81 Release Notes for more information.

R81 Management requires the separate installation of compatibility hotfix packages for managing the earlier versions of Check Point Gateways prior to R81. Consult the R81 Release Notes for more information.

R81 Management was designed as a completely different Management system and so can only monitor Check Point Gateways prior to R81.

R81 Management cannot manage earlier versions of Check Point Gateways prior to R81. Only R81 and above Gateways can be managed. Consult the R81 Release Notes for more information.

NEW QUESTION 254
Fill in the blank: Each cluster, at a minimum, should have at least ___________ interfaces.

Five

Two

Three

Four

NEW QUESTION 255
True or False: The destination server for Security Gateway logs depends on a Security Management Server configuration.

False, log servers are configured on the Log Server General Properties

True, all Security Gateways will only forward logs with a SmartCenter Server configuration

True, all Security Gateways forward logs automatically to the Security Management Server

False, log servers are enabled on the Security Gateway General Properties

NEW QUESTION 256
You noticed that CPU cores on the Security Gateway are usually 100% utilized and many packets were dropped. You don’t have a budget to perform a hardware upgrade at this time. To optimize drops you decide to use Priority Queues and fully enable Dynamic Dispatcher. How can you enable them?

fw ctl multik dynamic_dispatching on

fw ctl multik dynamic_dispatching set_mode 9

fw ctl multik set_mode 9

fw ctl miltik pq enable

NEW QUESTION 257
Fill in the blanks: A Check Point software license consists of a _______ and _______ .

Software container; software package

Software blade; software container

Software package; signature

Signature; software blade

NEW QUESTION 258
The purpose of the Communication Initialization process is to establish a trust between the Security Management Server and the Check Point gateways. Which statement best describes this Secure Internal Communication (SIC)?

After successful initialization, the gateway can communicate with any Check Point node that possesses a SIC certificate signed by the same ICA.

Secure Internal Communications authenticates the security gateway to the SMS before http communications are allowed.

A SIC certificate is automatically generated on the gateway because the gateway hosts a subordinate CA to the SMS ICA.

New firewalls can easily establish the trust by using the expert password defined on the SMS and the SMS IP address.

NEW QUESTION 259
Which Threat Prevention Profile is not included by default in R80 Management?

Basic – Provides reliable protection on a range of non-HTTP protocols for servers, with minimal impact on network performance

Optimized – Provides excellent protection for common network products and protocols against recent or popular attacks

Strict – Provides a wide coverage for all products and protocols, with impact on network performance

Recommended – Provides all protection for all common network products and servers, with impact on network performance

NEW QUESTION 260
After the initial installation the First Time Configuration Wizard should be run. Select the BEST answer.

First Time Configuration Wizard can be run from the Unified SmartConsole.

First Time Configuration Wizard can be run from the command line or from the WebUI.

First time Configuration Wizard can only be run from the WebUI.

Connection to the internet is required before running the First Time Configuration wizard.

NEW QUESTION 261
Which Threat Prevention Profile is not included by default in R80 Management?

Basic – Provides reliable protection on a range of non-HTTP protocols for servers, with minimal impact on network performance

Optimized – Provides excellent protection for common network products and protocols against recent or popular attacks

Strict – Provides a wide coverage for all products and protocols, with impact on network performance

Recommended – Provides all protection for all common network products and servers, with impact on network performance

NEW QUESTION 262
Which of the following commands is used to verify license installation?

Cplic verify license

Cplic print

Cplic show

Cplic license

NEW QUESTION 263
When a Security Gateway sends its logs to an IP address other than its own, which deployment option is installed?

Distributed

Standalone

Bridge Mode

Targeted

Updated Test Engine to Practice 156-215.81 Dumps & Practice Exam: https://www.examcost.com/156-215.81-practice-exam.html

Free vce exam dumps collection

Exam collection, exam cost, exam dumps, exam questions

New 2025 Latest Questions 156-215.81 Dumps – Use Updated CheckPoint Exam [Q239-Q263]

Leave a comment Cancel reply