[Oct-2023] Verified OMG Exam Dumps with OMG-OCSMP-MBA400 Exam Study Guide [Q32-Q48]

Rate this post

[Oct-2023] Verified OMG Exam Dumps with OMG-OCSMP-MBA400 Exam Study Guide

Best Quality OMG OMG-OCSMP-MBA400 Exam Questions ExamCost Realistic Practice Exams [2023]

NEW QUESTION 32
Choose the correct answer
Which statement is true regarding a typical model-based systems engineering methodology?

The activities in a typical systems engineering methodology are applied iteratively

The activities in a typical systems engineering methodology are applied sequentially.

The activities in a typical systems engineering methodology can be performed in any order

The activities in u typical systems engineering methodology work just as well for specialty engineering activities

NEW QUESTION 33
Choose the correct answer.
A modeling team supervisor wishes to force modelers to use particular metamodeling features What must the supervisor do?

place the profile in the current namespace with the model

“apply” the profile to the model

“apply” the profile to the model with the {strict} keyword applied

“apply” the profile to the model with the {required} keyword applied

“import” the profile to the model with the {strict} keyword applied

“import” the profile to the model with the {required} keyword applied

NEW QUESTION 34
Choose the correct answer-.
Which technique allows a user to objectively determine the best means of implementing a particular (unction?

a trade study

an objective analysis

operational research

a requirements analysts

NEW QUESTION 35
Choose the correct answer
Which relationship is likely to be most heavily used during requirements analysis?

copy

refine

satisfy

verify

NEW QUESTION 36
Choose the correct answer.
What is a common rationale for defining and applying a profile to a SysML model?

The profile makes the model suitable for a modeling tool

The profile extends the model with reusable elements, e.g. units.

The profile enables separate views of the model for the different stakeholder concerns.

The profile adds appropriate metainformation to the model to allow automated system analysis

NEW QUESTION 37
Choose the correct answer.
An engineering learn has been charged to design and build an embedded real-time control system using COTS (Commercial Off-The-Shelf) purchased components where possible A technical risk for such a control system is that the system will miss (i.e . fail to respond to) critical inputs The project has the additional risk that there may not be any components on the market that will meet both timing and cost constraints Given this, what information must be in the model before the engineering team can begin selecting and procuring COTS components?

timing constraints for all behaviors involved in responding to a critical input

(1) liming constraints for all behaviors involved in responding to a critical input (2) total system production cost provided by the customer

(1) minimum period of time between any two successive critical inputs (2) maximum acceptable time to produce all outputs for a critical input (3) allocation of (2) to all behaviors involved in responding to a critical input (4) total system production cost provided by the customer

(1) minimum period of time between any two successive critical inputs (2) maximum acceptable time to produce ail outputs for a critical input (3) allocation of (2) to all behaviors involved in responding to a critical input (4) total system production cost provided by the customer (5) allocation of (4) to system components

(1) minimum period of time between any two successive critical inputs (2) maximum number of critical inputs that will arrive in a given time interval (3) maximum acceptable time to produce all outputs for a critical input (4) allocation of (3) to all behaviors involved in responding to a critical input (5) total system production cost provided by the customer (6) allocation of (5) to system components

NEW QUESTION 38
Choose the correct answer.
A modeling team supervisor has defined a stereotype of block named *projectBlocke and wants to prevent any use of an unstereotyped block What must the supervisor do?.

delete * blocks from the profile

give * blocks the (abstract) keyword in the profile

mark the extending stereotype with the {strict} keyword

mark the extending stereotype with the {required} keyword

attach a note to “block” in the profile forbidding its use

NEW QUESTION 39
Choose the correct answer
What is the most significant deficiency impeding widespread use of SysML (without MARTE) in the real-time and embedded domain?

a quantifiable notion of time and resources

the terminology that is shared with the RT7E domain

a means to distinguish embedded from non-embedded systems

a means to quantify interactions between a system and its physical environment

NEW QUESTION 40
Choose the correct answer
The concerns of a group of stakeholders involved m a systems development project have been identified. What is the next project task to be earned out?

Define a set of viewpoints and align them with concerns

Define a set of viewpoints and align them with stakeholders

Group together similar stakeholders and assign them to viewpoints

Group concerns to identify stakeholders that are interested in the same viewpoint.

NEW QUESTION 41
Choose the correct answer
A company is executing a large distributed engineering project. More than a dozen engineers are contributing to the system model, working from different locations spread across three time zones The lead engineer has decided that it is essential to maintain a single model. The department director has expressed concern that the project may have trouble employing its engineers productively while still maintaining configuration control of this common model.
Which configuration management strategy is likely to be most successful*?

Use a centralized repository for the model files Allow only engineers in the eastern-most time zone to upload changes to the model files in the mornings, and the western engineers in the afternoons. Either can download and view the model files at any time. This will assure maximum productivity while minimizing the possibility of collisions

Use a configuration management tool to manage model elements. Assign ownership of model elements at the package level- Only the owner of a package may make changes to elements in that package Note that each relationship between model elements must be contained within a single package

Use a configuration management tool to manage model elements. Allow packages to be checked out by any user for editing, which locks the elements therein contained Packages may be viewed in read-only mode by any user at any time All model users receive alerts when a package they are viewing has been modified and checked-in. and changes are highlighted Packages may not remain checked out overnight

Co-locate the modeling team Trying to maintain configuration of a model across a distributed team is extremely difficult and may not succeed

NEW QUESTION 42
Choose the coned answer
What is one of the best reasons for a modeling Systems Engineer to use OCL?

OCL transforms easily into code

OCL facilitates understanding by engineers.

OCL can express any imaginable constraint

OCL allows tor precise specification of constraints based on contents of the model

NEW QUESTION 43
Choose the correct answer
Which SysML diagram type is a modification of the UML Composite Structure diagram?

Parametric Diagram

Internal Block Diagram

Package Diagram

Block Definition Diagram

NEW QUESTION 44
Choose the correct answer
Which OMG specifications does UPDM use at L1?

UMLandSysML

UML. SysML. and BPMN

UML, SysML and MARTE

UML, SysML and SOAML

NEW QUESTION 45
Choose the correct answer
Modehca solvers can produce large volumes of time-based results (such as time-based power usage), but requirements are often based on scalar values such as “maximum peak power” and ‘average power usage”.
Which of the following is generally the most effective way to verify such requirements?

Import the Modelica time-based power usage results into SysML Then use SysML parametncs to calculate these scalar values, and compare them to the requirements

ave the Modelica solver also compute these scalar values from its time-based power usage results Then import the resulting scalar values into SysML. and compare them to the requirements.

Use the SysML4Modelica profile to transform the Modelica time-based power usage results into these scalar values Then import the resulting scalar values into SysML, and compare them to the requirements.

Modelica models can only produce time-based results and thus cannot support scalar results like these, which must either be calculated using a different tool or measured on physical prototypes Then enter the resulting scalar values into SysML, and compare them to the requirements

NEW QUESTION 46
Choose the correct answer
A large company uses SysML to design energy systems, and plans to use a specialized proprietary analysis tool (X) for evaluating and comparing the cost, performance, and reliability of energy system alternatives The engineers at the company want to automatically create analysis models in X from design models in SysML.
The achieve this, they will use the following process:
(1) Specify the appropriate module in X10 be used for each block m the SysML design model.
(2) Write scripts that use these mappings to automatically create analysis models in X Which approach is most flexible when enabling this automation?

define a package that contains a note for each type of module in X. and anchor notes to the blocks in the design model

define a profile that contains a stereotype for each type of module m X. and assign the stereotype to the blocks in lite design model

define a profile that contains a tag for each type of X in the tool, and assign the stereotype to the blocks in the design model

define a profile that contains a stereotype with a tag that can store the name of the module in X. apply the stereotype to the blocks in the design model, and populate the tag

define a package that contains a block for each type of module m X (e g module_1 block) and create a dependency relationship from the module block to the blocks in the design model

NEW QUESTION 47
Choose the correct answer.
Given the following diagram:

Assume that all stereotypes required by the SysML-Modehca Transformation specification (if any) have been applied but are not necessarily shown here Assume that FixedWall. ViscoelasticSpring. and RigidMass are fully defined in a Modelica library.
What else must be done to get this model ready for solving according to the SysML-Modelica Transformation specification?

Provide specific values. Also define a parametric diagram that includes equations for Kirchhoffs Laws consistent with the above ibd.

Provide specific values Nothing else is required, as Kirchhoff’s I laws are automatically taken care of consistent with the above ibd

Nothing – it is ready as-is

Modelica cannot handle this type of nonlinear model

NEW QUESTION 48
Choose the correct answer.
What is common practice when integrating software models into SysML system models?

The software is specified with UML in the SysML system model

The software is specified with SysML in the SysML system model.

Cross-relationships are defined between a UML software model and a SysML system model

A model-to-model transformation integrates a UML software model into a SysML system model

Authentic Best resources for OMG-OCSMP-MBA400: https://www.examcost.com/OMG-OCSMP-MBA400-practice-exam.html

Free vce exam dumps collection

Exam collection, exam cost, exam dumps, exam questions

[Oct-2023] Verified OMG Exam Dumps with OMG-OCSMP-MBA400 Exam Study Guide [Q32-Q48]

Leave a comment Cancel reply