New 2026 Realistic Free VMware 5V0-22.23 Exam Dump Questions & Answer [Q41-Q57]

5/5 - (2 votes)

New 2026 Realistic Free VMware 5V0-22.23 Exam Dump Questions and Answer

5V0-22.23 Practice Test Engine: Try These 75 Exam Questions

NEW QUESTION 41
A six-node vSAN ESA cluster contains multiple virtual machines, and a vSAN storage policy with the rule
“Failures to tolerate” set to “1 failure – RAID-5 (Erasure Coding)” is assigned. A vSAN administrator has changed the rule in the assigned policy to “2 failures – RAID-6 (Erasure Coding)”.
What is the result of this change?

No changes occur until the policy is reapplied.

The changes are queued for 60 minutes.

The policy change is rejected immediately.

The updated policy is serially applied to the virtual machines.

NEW QUESTION 42
An administrator is tasked to create a Kerberos secured NFS v4.1 file share.
Which information is minimally required during the configuration of the File Service?

Organizational Unit, User Account, Password

Active Directory Domain, User Account, Password

Kerberos Server, User Account, Password

Active Directory Domain. Organizational Unit, User Account. Password

NEW QUESTION 43
Which two actions are recommended when adding a host to a vSAN cluster? (Choose two.)

Create uniformly-configured hosts

Disable vSAN performance service

Disable vSphere Cluster Services

Disable vSphere High Availability (HA)

Reference the VMware Compatibility Guide

NEW QUESTION 44
vSAN requires that the virtual machines deployed on the vSAN datastores are assigned at least one storage policy, but the administrator did not explicitly assign a storage policy when provisioning the new VM.
What is the result of this situation?

The VM provisioning will fail.

The VM objects will be protected based on the vSAN Default Storage Policy configurations.

The vSphere Web Client will choose the last vSAN Storage Policy used.

No data protection will be applied to the VM objects.

NEW QUESTION 45
A vSAN administrator notices that the VMware Skyline Health: Network Latency Check reports indicate that three hosts are noncompliant.
Which action should the vSAN administrator take?

Immediately reboot the non-compliant hosts

Check VMKNICs, uplinks, physical switches, and associated settings

Rerun the VMware Skyline Health: vSAN Cluster Partition report

Place the non-compliant hosts into an isolated network partition

Explanation
The correct answer is B, check VMKNICs, uplinks, physical switches, and associated settings. This is because the VMware Skyline Health: Network Latency Check reports the network latency between vSAN hosts and displays the network latency in real time. Failure indicates that the network latency is above the normal threshold, which can affect the performance and availability of vSAN. The network latency can be caused by various factors, such as misconfiguration, congestion, or errors in the network components. The vSAN administrator should check the VMKNICs, uplinks, physical switches, and associated settings for any issues and resolve them accordingly. The vSAN administrator can also use tools such as vmkping or esxtop to test the network connectivity and performance between hosts. The other options are incorrect for the following reasons:
A, immediately reboot the non-compliant hosts, is incorrect because rebooting the non-compliant hosts is not a recommended action and can cause more disruption and data loss than resolving the network issue. Rebooting the hosts will also trigger a resynchronization of data across the cluster, which can affect the performance and availability of vSAN.
C, rerun the VMware Skyline Health: vSAN Cluster Partition report, is incorrect because rerunning the VMware Skyline Health: vSAN Cluster Partition report will not help to resolve the network latency issue. The vSAN Cluster Partition report checks if there are any network partitions in the cluster that prevent communication between hosts. The network partition can be caused by network latency, but it is not the same as network latency. The vSAN administrator should first fix the network latency issue before checking for any network partitions.
D, place the non-compliant hosts into an isolated network partition, is incorrect because placing the non-compliant hosts into an isolated network partition will not help to resolve the network latency issue.
It will also cause more problemsfor vSAN, such as data inconsistency, reduced redundancy, and degraded performance. The vSAN administrator should avoid creating any network partitions in the cluster and ensure that all hosts can communicate with each other. References:
VMware vSAN Specialist v2 Exam Preparation Guide, page 9
Network Health – Network Latency Check (2149511)

NEW QUESTION 46
Due to a planned power outage, an administrator decides to shut down the vSAN cluster using the Shutdown Cluster Wizard. The administrator starts by checking the vSAN health service to confirm the cluster is healthy and then powers off all virtual machines (VMs) including vCLS VMs.
Which step needs to be taken before starting the Shutdown Cluster Wizard?

Place all ESXi hosts into maintenance mode

Disable cluster member updates from vCenter Server

Turn off High Availability

Shutdown vCenter

NEW QUESTION 47
What is the purpose of the TRIM/UNMAP process?

Collects vSAN log files

Repairs internal cache errors

Deletes orphaned snapshots

Reclaims disk space

NEW QUESTION 48
Which two considerations should an architect assess when designing a HCI Mesh solution with VMware vSAN and VMware vSphere High Availability (HA)? (Choose two.)

A server vSAN cluster can serve its local datastore up to five client vSAN clusters.

A client cluster can mount up to ten remote datastores from one or more vSAN server clusters.

A minimum of three nodes are required within the client cluster for vSphere HA to work

If vSphere HA is to work with HCI Mesh, Datastore with Permanent Device Loss (PDL) must be confiqured to Power off and restart VMs.

If vSphere HA is to work with HCI Mesh, Datastore with AllPaths Down (APD) must be configured to Power off and restart VMs.

NEW QUESTION 49
An architect is designing a vSAN stretched cluster and needs to ensure that data remains on a given site in case of a network partition between the sites.
Which configuration would do this?

Preferred and secondary sites

vCenter High Availability

Distributed Resource Scheduler

IvSoh ere High Availability

NEW QUESTION 50
A vSAN administrator needs to build a vSAN ESA cluster with RAID-5/FTT 1 adaptive storage policy.
What is the absolute minimum number of hosts that need to be part of that vSAN ESA cluster?

6 hosts

4 hosts

5 hosts

3 hosts

NEW QUESTION 51
What is the minimum required number of hosts to provide data redundancy for a vSAN stretched cluster using dual-site mirroring and local protection with 1 failure – RAID-1 (Mirroring)?

3 hosts

4 hosts

6 hosts

NEW QUESTION 52
After a server power failure, the administrator noticed the scheduled resyncing in the cluster monitor displays objects to be resynchronized under the pending category.
Why are there objects in this category?

The delay timer has not expired.

These objects belong to virtual machines, which are powered off.

Object resynchronization must be started manually.

There are too many objects to be synchronized.

NEW QUESTION 53
A vSAN administrator is noticing that the objects resynchronizing in the cluster are taking longer than expected and wants to view the resynchronizing metrics.
Which performance category should the vSAN administrator open?

Disks

Host Network

Resvnc Latency

Backend

NEW QUESTION 54
An administrator is upgrading multiple vSAN Witness nodes with vLCM (single image management) that are used for vSAN Stretched and two-node Clusters.
What two witness node types can the administrator upgrade? (Choose two.)

Appliance witness node

Shared witness node

Nested witness node

Dedicated witness node

Physical witness node

NEW QUESTION 55
A customer wants to validate if Skyline online health is working for vSAN and finds out that Skyline is not fully configured yet.
What two requirements must be met to make sure that Skyline online health will work? (Choose two.)

Add the Skyline license into Virtual Center

Enable Skyline Health on the vSAN Cluster

Enable CEIP and join the program

Have a working Internet connection

Have vCenter on version 7 or higher

NEW QUESTION 56
A customer wishes to host a new range of applications with high-performance requirements, specifically, low latency. The current vSAN platform is based on ReadyNode hardware and uses a vSAN 7.0 U2 hybrid topology configuration.
Which would satisfy the customer’s requirement?

Deploy the application on a new cluster with vSAN 8.0 ESA using a new hardware design

Deploy the new applications on the existing cluster with a RAID-6 VM storage policy and an additional stripe width of 4

Deploy the application on a new cluster with vSAN 8.0 OSA using the existing hybrid configuration

Perform an in-place upgrade from vSAN 7.0 U2 OSA to vSAN 8.0 ESA

Explanation
Deploying the application on a new cluster with vSAN 8.0 ESA using a new hardware design is the correct answer because it will satisfy the customer’s requirement for low latency. vSAN 8.0 ESA is a new architecture that uses a storage pool configuration where all disks are treated as capacity disks and use a new algorithm to distribute data across them. This improves the I/O flow, reduces the write amplification, and eliminates the cache tier bottleneck. Using a new hardware design with all-flash disks or NVMe disks will further enhance the performance and latency of the application, as these disks have faster read and write speeds than hybrid disks. Deploying the new applications on the existing cluster with a RAID-6 VM storage policy and an additionalstripe width of 4, deploying the application on a new cluster with vSAN 8.0 OSA using the existing hybrid configuration, and performing an in-place upgrade from vSAN 7.0 U2 OSA to vSAN 8.0 ESA are not valid or optimal solutions for this scenario. Deploying the new applications on the existing cluster with a RAID-6 VM storage policy and an additional stripe width of 4 will increase the resiliency and availability of the data, but it will also increase the network traffic, disk space consumption, and parity calculation overhead, which will negatively affect the latency and performance of the application. Deploying the application on a new cluster with vSAN 8.0 OSA using the existing hybrid configuration will not improve the latency significantly, as vSAN 8.0 OSA still uses the same disk group configuration as vSAN 7.0 U2 OSA, where one disk is designated as a cache disk and the rest are capacity disks. The cache disk can still become a bottleneck for high-performance applications, especially if it is not an SSD or NVMe disk. Performing an in-place upgrade from vSAN 7.0 U2 OSA to vSAN 8.0 ESA is not possible, as vSAN ESA requires a different hardware design than vSAN OSA. The existing disk groups need to be deleted and all disks need to be erased before switching to vSAN ESA. References:
[VMware vSAN Specialist v2 Exam Preparation Guide], page 6
What’s New in VMware vSAN 8.0

NEW QUESTION 57
All of the virtual machines running on a hybrid vSAN datastore have this storage policy assigned:
Failures to Tolerate (FTT) rule is set to “2 Failures – RAID-1 (Mirroring)” The vSAN administrator needs to reduce the amount of vSAN datastore capacity the virtual machines will consume.
Which action should the vSAN administrator take to meet this goal?

Modify the FTT rule to “2 Failures – RAID-5 (Erasure Coding)”

Add the “Flash read cache reservation” rule to the storage policy, and set to 0%

Disable Operations reserve and Host rebuild reserve and click “Apply”

Change the FTT rule to “1 Failure – RAID-1 (Mirroring)”, and select “Now” for Reapply to VMs