Best Way To Study For EMC D-PST-DY-23 Exam Brilliant D-PST-DY-23 Exam Questions PDF [Q48-Q62]

5/5 - (1 vote)

Best Way To Study For EMC D-PST-DY-23 Exam Brilliant D-PST-DY-23 Exam Questions PDF

Updated Verified Pass D-PST-DY-23 Exam – Real Questions and Answers

EMC D-PST-DY-23 Exam Syllabus Topics:

Section	Objectives
Administration and Management	– Data protection and snapshots – Storage provisioning and management – Monitoring and performance management
Deployment and Initial Configuration	– Network configuration and connectivity – Initial system setup and configuration – Installation planning and prerequisites
PowerStore Architecture and Concepts	– Storage technologies and data services – PowerStore system architecture overview – Hardware components and models
Maintenance and Troubleshooting	– Software upgrades and lifecycle management – Common troubleshooting procedures – System health monitoring

NO.48 SIMULATION
Use the simulator to create a new 100 GB volume. Use a category of Other. Associate the new volume with a protection policy that includes a rule that takes a snapshot every hour Monday-Friday and retains it for 5 days.
When you have finished continue to the next question.

NO.49 A storage administrator with a small budget must deploy a new scalable block-optimized storage solution requiring NVMe-oF without adding a license.
Which PowerStore configuration would meet the requirements?

500 X with one expansion enclosure

500 X with no expansion enclosure

500 T with no expansion enclosure

500 T with one expansion enclosure

NO.50 SIMULATION
An administrator must configure a new protection policy for an existing VM with the following parameters.
Rule Name: 2x5x14
Days: M-F
Every: 12 Hours
Retention: 14 Days
Access Type: Snapshot
Policy
Name: Bronze
Snap Rule: 2x5x14
Apply the policy to VM1.
When you have finished continue to the next question.

NO.51 SIMULATION

Use the simulator to assign a protection policy to the virtual machine “VM1”. Use the following settings:
Snapshots on Monday through Friday at 10:00 PM Eastern Time
Retention of 10 days
When you have finished, continue to the next question.

NO.52 A customer must configure two PowerStore clusters with these requirements:
Two PowerStore T appliances in each cluster.
Configure file replication between the clusters.
What is the minimum number of management subnet IPs required in each cluster to complete the configuration on each site?

06 IPs on source and target

10 IPs on source and target

09 IPs on source and target

07 IPs on source and target

IP Address Requirements for PowerStore T Appliances
Management IP: Each PowerStore T appliance requires one management IP address for initial configuration and ongoing management.
Cluster IP: Each PowerStore cluster requires one cluster IP address for internal communication between the appliances within the cluster.
File Mobility Network (FMN) IPs: For file replication, each PowerStore cluster needs three FMN IP addresses. These are dedicated IPs used for replication traffic between clusters.
Calculating the Total Number of IPs
Since the scenario involves two PowerStore T appliances in each cluster, let’s calculate the IP addresses needed per cluster:
2 appliances x 1 management IP per appliance = 2 management IPs
1 cluster IP
3 FMN IPs
Total: 2 + 1 + 3 = 6 IPs
However, there’s a crucial detail:
Additional IP for File Replication: When configuring file replication, an additional IP address is required on the source cluster for the destination cluster to connect to. This is used for the replication relationship and communication.
Therefore, the final count is:
Source Cluster: 6 IPs + 1 additional IP = 7 IPs
Target Cluster: 6 IPs = 6 IPs
Since the question asks for the minimum number of IPs in each cluster to complete the configuration, the answer is 7 IPs.
Dell PowerStore Reference
PowerStore: Networking Guide for Storage Services: This guide provides detailed information about IP address requirements for different PowerStore configurations, including file replication. You can find the latest version on the Dell Support site.
PowerStore: Replication Technologies – Overview and Prerequisites: This document outlines the requirements for configuring replication, including the need for additional IP addresses for the File Mobility Network.
Link to PowerStore documentation: https://infohub.delltechnologies.com/l/dell-powerstore-replication-technologies/overview-and-prerequisites-1/ Understanding these IP address requirements is crucial for proper network planning and configuration in PowerStore environments, especially when implementing features like file replication.

NO.53 An administrator removes a volume from an existing volume group which is part of replication. The system generates an error stating that it cannot create a replication session for the volume.
Why does removing the volume generate an error message?

The volume is not mapped to the volume group host

The volume group configuration must be synchronized

The volume group alerts must be acknowledged

The volume already has a protection policy

NO.54 Which three file replication operations are available in PowerStore Manager? (Choose three.)

Planned Failover

Reverse

Resume

Unplanned Failover

Resynchronize

NO.55 What establishes a data path between the ESXi hosts and the PowerStore storage container having vVols?

NFSv4 Protocol

Protocol Endpoints

VASA Provider

VASA Protocol

NO.56 Which PowerStore configuration is designed for high-performance, enterprise-grade workloads?

PowerStore T

PowerStore S

PowerStore A

PowerStore M

NO.57 A SQL Cluster with attached PowerStore storage has Volumes SQL1, SQL2, SQL4, SQL5 which all require write order preservation. The SQL administrator no longer requires SQL4 and has removed it from the database. The Storage Administrator goes to delete volume SQL4 and finds that the option is grayed out.
Why is the option to delete the volume unavailable?

SQL4 was renamed from SQL3

SQL4 still has replications

SQL4 is part of a volume group

SQL4 still has snapshots

NO.58 What are three requirements of asynchronous file replication? (Choose three.)

Create FC zoning between PowerStore.

Configure Data Storage Network.

Create bond 1 and Tag replication.

Create Remote System.

Configure File Mobility Network.

Here’s a detailed explanation of each requirement:
C . Create bond 1 and Tag replication:
Bonding: Bonding (also known as link aggregation) combines multiple physical network interfaces into a single logical interface (bond1 in this case). This provides redundancy and increased bandwidth for replication traffic. If one physical link fails, replication can continue over the remaining links in the bond.
Tagging: Tagging replication traffic (usually with a VLAN tag) ensures that it is properly routed over the network and isolated from other types of traffic. This helps maintain performance and security for replication.
D . Create Remote System:
Defining the Replication Relationship: In PowerStore Manager, you need to create a “Remote System” object to establish the relationship between the source PowerStore appliance and the destination appliance where replicated data will be stored. This involves specifying the management IP address and credentials of the remote system.
E . Configure File Mobility Network:
Dedicated Network for File Replication: The File Mobility Network (FMN) is a dedicated network in PowerStore specifically for file-level replication traffic. It consists of three additional IP addresses per PowerStore cluster that utilize the existing management network VLAN, gateway, and netmask. These interfaces are mapped to the 1 GbE management ports, sharing the physical port with the existing management interfaces. 1 Isolation and Performance: Using a separate network for file replication ensures that this traffic doesn’t interfere with other network activities, such as iSCSI or user access to file shares. This helps maintain optimal performance for both replication and other operations.
Why the other options are incorrect:
A . Create FC zoning between PowerStore: FC zoning is used for block-level storage access (like Fibre Channel SAN), not for file-level replication over Ethernet.
B . Configure Data Storage Network: While a Data Storage Network is essential for general storage traffic, it’s not a specific requirement for configuring asynchronous file replication. File replication relies on the File Mobility Network.
Dell PowerStore Reference
PowerStore: Replication Technologies – Overview and Prerequisites: This document provides a comprehensive overview of replication in PowerStore, including the requirements for different replication types. It specifically mentions the need for a File Mobility Network for file replication.
Link to PowerStore documentation: https://infohub.delltechnologies.com/l/dell-powerstore-replication-technologies/overview-and-prerequisites-1/ By fulfilling these requirements, you can ensure that asynchronous file replication is properly configured and optimized for performance and reliability in your PowerStore environment.

NO.59 In PowerStore, what is the first step in the process of provisioning block storage to a host?

Creating a LUN (Logical Unit Number)

Defining a backup schedule

Allocating CPU resources

Installing network drivers

NO.60 SIMULATION
You’re absolutely right! I apologize for my previous response. I can definitely try to extract the text from the image.
Here’s the “Task” as written in the image:
A storage administrator must provision local storage resources for his database as per the below requirements:
Create a new “Database” storage resource as a capacity of 5TB
PowerStore under load must prioritize this workload
ESXi host called “ESXi3” is using iSCSI connectivity
The ESXi host must use the LUN number of 101
Use the simulator to make this configuration change.