[2023] Verified 300-615 Dumps Q&As – 1 Year Free & Quickly Updates [Q31-Q51]

Rate this post

[2023] Verified 300-615 Dumps Q&As – 1 Year Free & Quickly Updates

Latest 2023 Realistic Verified 300-615 Dumps – 100% Free 300-615 Exam Dumps

Cisco 300-615 exam is a part of the CCNP Data Center certification program. Troubleshooting Cisco Data Center Infrastructure certification is designed to validate the skills and knowledge required to implement and troubleshoot modern data center technologies. Troubleshooting Cisco Data Center Infrastructure certification program covers a wide range of topics, including data center infrastructure, automation, virtualization, and more. The Cisco 300-615 exam specifically focuses on troubleshooting data center infrastructure issues.

The Cisco 300-615 test is what any IT professional planning to make big in the world of data center should take-up. With an unwavering focus on data center infrastructure and operations, this exam is here to generate an empowered and seasoned workforce that is capable to handle their responsibilities efficiently and help the company achieve its goals.

NEW QUESTION 31
What does this adapter output indicate?
adapter 1/6/1 (fls): 2# lunlist 9
vnic: 9 lifid: 6
– FLOGI State : flogi est (fc_id Oxac0e04)
– PLOGI Sessions
– WWNN 50:0a:09:83:8d:53:43:44 WWPN 50:0a:09:83:8d:53:43:44 fc_id 0x000000
– LUN’s configured (SCSI Type, Version, Vendor, Serial No.)
– LUN ID: Ox0000000000000000 access failure
-REPORT LUNs Query Response
– Nameserver Query Response
-WWPN: 54:b1:6a:94:64:3e:73:44

The configured initiator LUN ID does not match the configured target LUN ID

The target device configuration does not allow the initiator to access the LUN

The port types between the target and initiator are incorrectly configured

The target of the configured zone does not match the target of the configured boot order

NEW QUESTION 32
An engineer must upgrade all components in a Cisco UCS domain to the same package version, but the upgrade process fails to complete. Which set of Auto Install actions resolves the problem?

Install Infrastructure Firmware, then Install Server Firmware.

Install infrastructure Firmware, then Install Hypervisor Firmware.

Install Hypervisor Firmware, then Install Infrastructure Firmware

Install Server Firmware, then Install Infrastructure Firmware

Explanation
https://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/sw/firmware-mgmt/gui/2-5/b_GUI_Firmware_Ma

NEW QUESTION 33
Refer to the exhibit.

A customer network uses OSPFv2 and MP-BGP protocols A network administrator installs a new Cisco Nexus Switch in the data center but experiences a BGP RIB failure Which action solves the issue?

Change the administrative distance of OSPF to 220

Configure the route as a BGP backdoor

Use a filter list for OSPF to filter both routes

Implement next-hop-self

NEW QUESTION 34
Refer to the exhibit.

A certificate is implemented on the security configuration on the Cisco ACI controller. A customer receives a “Connection Not Secure” error in a browser every time the customer logs in to the Cisco APIC GUI. Which action resolves the issue?

Include a private key with the certificate.

Use a browser that supports keys of 2048 bits.

Configure a corporate certificate authority for the certificate.

Add a 1536-bit key to the APIC GUI.

NEW QUESTION 35
An engineer removes a VMM domain from an endpoint group called EPG-1, but the distributed port group fails to be deleted. Which action must be taken to resolve the issue?

Remove the port group manually.

Migrate all virtual machines in the EPG-1 to different hypervisors.

Remove the remaining EPGs from the VMM domain.

Migrate all virtual machines in the EPG-1 to different port groups.

NEW QUESTION 36
Drag and drop the Cisco UCS SNMP fault types from the left onto the correct issues on the right.

NEW QUESTION 37
Refer to the exhibit.

A Postman call to a Cisco APIC fails. The access credentials were confirmed to be configured as expected.
Which action resolves the issue?

Change operation type to POST

Modify the protocol to HTTP

Change the IP address to a domain name

Modify the target protocol type to XML

NEW QUESTION 38
Drag and drop the Cisco UCS SNMP fault types from the left onto the correct issues on the right.

NEW QUESTION 39
An engineer must upgrade all components in a Cisco UCS domain to the same package version, but the upgrade process fails to complete. Which set of Auto Install actions resolves the problem?

Install Infrastructure Firmware, then Install Server Firmware.

Install infrastructure Firmware, then Install Hypervisor Firmware.

Install Hypervisor Firmware, then Install Infrastructure Firmware

Install Server Firmware, then Install Infrastructure Firmware

Explanation
https://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/sw/firmware-mgmt/gui/2-5/b_GUI_Firmware_Ma

NEW QUESTION 40
An engineer is troubleshooting issues in Cisco UCS Director. Drag and drop the possible causes from the left onto the correct issues on the right.

NEW QUESTION 41

Refer to the exhibit. A functioning trunk port Ethernet1/48 exists between two identical Cisco Nexus 5000 Series Switches. The interfaces on the switches support the MACsec feature and are configured identically. To enable manual MACsec, an engineer adds the configuration shown in the exhibit to both sides of the trunk.
The trunk port stops functioning. Which action should be taken to resolve the issue?

Disable and then enable the port

Enable the license for the trunk ports to support MACsec

Lower the MTU value to less than 9216 bytes

Configure the PMK with a length of 2048 bytes

NEW QUESTION 42
Refer to the exhibit.

An engineer troubleshoots the HSRP configuration and notes that the remote end uses HSRP version 1. The engineer sets the local HSRP to version 1, but the problem continues. Which action resolves the issue?

Change the local group number to 255 or less and request that the remote data center matches the group member in its configuration.

Set the local group number as 300 in the remote data center configuration

Run version 1 and version 2 HSRP on VLAN300 in the local data center.

Reduce the priority of the local HSRP to below 100 to force the local HSRP to standby and then change the version to version 1.

Explanation
https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/ipapp_fhrp/configuration/xe-16/fhp-xe-16-book/fhp-hsrp-v2.p

NEW QUESTION 43
Refer to the exhibit.

A recent configuration change removes the HSRP adjacency between the SW-1 and SW-2 Cisco Nexus switches. The change causes the servers on this subnet to lose Internet access. Which action restores the connectivity of all servers on VLAN 13?

Disable HSRP IP redirects on SW-1.

Set the HSRP priority to 70 on SW-1.

Activate HSRP preempt on SW-2.

Set the HSRP password on SW-2.

NEW QUESTION 44
Refer to the exhibit.

Partial configuration from N9K-1 and N9K-2 is included. The client has two WANs connected.
WAN-1 is for normal business-day activities.
WAN-2 is for server backups during nonworking hours of 1:00 a.m. to 5:00 a.m. daily.
The client says that at the scheduled time for backup, the data center server failed to use the WAN-2 link to back up the servers to the cloud backup system. What is the solution to this problem?

The event timer must be written in epoch time format.

The Cisco Nexus switch must be configured with one applet because a configuration with two applets will fail.

The Cron entry must be configured without double quotes.

The applet called “Backup” must include an action to remove the current static route.

NEW QUESTION 45
Refer to the exhibit. A network engineer deploys scripts to the guest shell of a Cisco Nexus switch. The scripts fail to operate properly due to the limited CPU and file system resources that are assigned by default to the guest shell. The engineer allocated more memory and disk space to the guest shell, but the application continues to fail. Which action resolves the issue?

Reboot the guest shell

Upgrade the guest shell

Disable and enable bash shell

Redeploy the bash shell

NEW QUESTION 46
Refer to the Exhibit.

An Engineer cannot log in to the Cisco IMC page of the Cisco UCS C220 server. Which action resolve the issue?

Se the FQDN of the Cisco IMC webpage login page instead of the IP address for the connection to be secure.

Use the DNS of the Cisco IMC webpage login page instead of the IP address for the connection to be secure.

Replace the self-signed certificate that is installed on the Cisco IMC with a server certificate that is signed from the client corporate certificate.

Replace the self-signed certificate that is installed on the Cisco IMC with a user certificate that is signed from the client corporate certificate.

NEW QUESTION 47
During a boot process of a Cisco UCS C-Series Rack Server, an engineer receives a “No Signal” message from the vKVM and physical connection. Which set of steps resolves the issue?

1- Disconnect the power cord
2- Confirm that all cards are property seated
3- Connect the power cord and power on the server

1- Power off the server and disconnect the power cord
2- Confirm that all cards are property seated
3- Connect the power cord and power on the server

1- Power off the server and disconnect the power cord
2- Confirm that all cards are available
3- Connect the power cord and power on the server

1- Disconnect the power cord
2- Confirm that all cards are properly seated
3- Connect the power cord

https://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/c/ts/guide/b_C-Series_Troubleshooting_Guide.pdf

NEW QUESTION 48
Refer to the exhibit.

A network engineer traces the packet flow from the Veth991 of a blade server toward the core switch. The switch reports performance issues What is the role of the interface Eth1/7?

IOM network interface

fabric interconnect uplink interface

IOM host interface

server interface

Explanation
E1/7 is border interface, which is used as uplink. All other veth interfaces are SIF, which stands for Server Interface.

NEW QUESTION 49
An engineer troubleshoots a VXLAN EVPN data center. The applications in the data center fail to reach the DNS server that is located at IP 10.10.10.10. The engineer examines the BGP EVPN routing table and notes that the IP prefix route covers the DNS server is missing. Which action resolve the issue?

Set the IP prefix route to represent [5]:[0]:[0]:[32]:[10.10.10.10]/224 in the routing table.

Configure an IP ARP entry to represent [2]:[0]:[0]:[48]:[0050.569f.1285]:[32]:[10.10.10.10]/272 in the routing table

Set the IP prefix route to represent [2]:[0]:[0]:[48]:[0050.569f.1285]:[0]:[0.0.0.0]/216 in the routing table

Configure an IP ARP entry to represent [4]:[0300.0000.00fc.bd00.0309l[32]:[10.10.10.10]/136,n the routing table

NEW QUESTION 50
A Fibre Channel interface on a Cisco Nexus 5000 Series Switch receives bit errors, and the switch disables the interface. A temporary workaround must be implemented before the root cause is identified. Which action does an engineer take to prevent this issue from reoccurring?

Verify that the SFPs are supported.

Change the SFP to operate at 4 Gbps instead of 2 Gbps.

Run the shutdown and then no shutdown command on the interface.

Run the switchport ignore bit-errors command on the interface.

Section: Storage Network

NEW QUESTION 51
An IOM fails during a firmware upgrade and is unresponsive. Which action recovers the module?

Restore UCSM configuration from backup.

Roll back to the previous firmware.

Use AutoInstall to reinstall the firmware.

From the peer IOM, reset the faulty module.

Section: Management and Operations
Explanation/Reference:

Loading …

Cisco 300-615 exam covers a wide range of topics related to troubleshooting Cisco data center infrastructure, including network protocols, virtualization, automation, storage area networks (SANs), and more. Candidates who pass 300-615 exam will have demonstrated the ability to troubleshoot complex data center infrastructure problems using a range of tools, techniques, and best practices.

300-615 Dumps PDF and Test Engine Exam Questions: https://www.examcost.com/300-615-practice-exam.html